Differences

This shows you the differences between two versions of the page.

--- sw_release [2018/10/28 11:18] – arzaman
+++ sw_release [2025/04/01 09:44] (current) – external edit 127.0.0.1
@@ Line 101: / Line 101: @@
+==== SPC1000-biab-v1.3-009.bin====
+Date	03 Dec 2018
+  * Removed operation of PA13 pin as digital output, to fix current consumption issue causing a voltage drop that interferes with NTC probe measurements
+  * Fixed bug where software may freeze when probe configuration is changed from DS18B20 to NTC
+{{ ::spc1000-biab-v1.3-009.bin.zip |}}
+==== SPC1000-biab-v1.3-010.bin====
+Date	19 jan 2019
+  * Added Brewfather integration components
+  * Added MQTT process start command
+  * Added MQTT pump on/off command
+  * Added pump cycle pause/resume in auto mode
+  * Added pump status in MQTT dynamic data
+  * Added possibility to skip step mash in BIAB recipe
+  * Fixed bug where mash and HLT heater outputs are enabled unconditionally upon resuming a paused process in automatic run mode
+  * Added PWM control of mash channel during boil phase via MQTT commands
+  * Added pump status icons
+**NOTE** this SW release is mandatory for [[https://web.brewfather.app|External Link]] INTEGRATION
+{{ :spc1000-biab-v1.3-010.bin.zip |}}
 ===== Smart Thermostat =====
@@ Line 219: / Line 246: @@
 {{ ::spc1000-base-wifi-v0.5-013.bin.zip |}}
+==== SPC1000-base-wifi-v0.5-014.bin ====
+date	03 Dec 2018
+  * Added Brewfather integration components
+  * Removed operation of PA13 pin as digital output, to fix current consumption issue causing a voltage drop that interferes with NTC probe measurements
+  * Fixed bug where software may freeze when probe configuration is changed from DS18B20 to NTC
+**NOTE** this SW release is mandatory for [[https://web.brewfather.app|External Link]] INTEGRATION
+{{ ::spc1000-base-wifi-v0.5-014.bin.zip |}}