Differences

This shows you the differences between two versions of the page.

--- demo_tutorials [2018/10/27 14:17] – [Smart BBQ] arzaman
+++ demo_tutorials [2025/04/01 09:44] (current) – external edit 127.0.0.1
@@ Line 31: / Line 31: @@
 ITALIAN VERSION
-{{youtube>RnQzNxVUHeo}}
+{{youtube>y55vWCP8xLs}}
@@ Line 39: / Line 41: @@
 ===== Klarstein and other single vessel BIAB mash tun retrofit =====
-SmartPID controller is suitable tro upgrade single vessel BIAB mash tun like Klarstein, Ace Microbrewery, EasyGrain, HopCat, Easybrew and may other branded
+SmartPID CUBE controller is suitable tro upgrade single vessel BIAB mash tun like Klarstein, Ace Microbrewery, EasyGrain, HopCat, Easybrew and may other branded
 The smartPID controller can provide a full set of benefits and new feature like
@@ Line 55: / Line 57: @@
   * SW upgradable
-The upgrade procedure is almost plug and play and requires to disassemble the original controller and insert SmartPID and a SSR relay
+The upgrade procedure is almost plug and play and requires to disassemble the original controller and insert SmartPID CUBE, AC/DC power supply and a SSR relay
 Below the wiring schema
-{{:klarstein_retrofit_with_smartpid_wiring_schema.png?200|}}
+{{:klarstein_retrofit_with_smartpid_cube_wiring_schema.png?200|}}
 A complete kit with all components is provided with
-  * SmartPID controller with pre-loade last version of smart hombrewing application
+  * SmartPID CUBE controller with pre-loade last version of smart hombrewing application
   * NTC 10K  1% temperature probe M6 replacement
   * SSR (solid state relay) 40A with heatsink
   * Stainless steel laser cut front panel
+  * Stainless steel mounting brakets
+  * 110/220V AC - 12V DC power supply
+  * Wire connectors
   * 3M professional be-adhesive tape
 The step by step guide allow you to easily upgrade your system
-{{ :klarstein_retrofit_with_smartpid_step-by-step_guide.pdf |}}
+{{ :klarstein_retrofit_with_smartpid_cube_step-by-step_guide.pdf |}}
 Guida all'aggiornamento passo passo (ITA)
-{{ :klarstein_retrofit_with_smartpid_step-by-step_guide.pdf |}}
+{{ :aggiornamento_klarstein_con_smartpid_cube_guida_step-by-step.pdf |}}
 here video tutorial of the operations
@@ Line 81: / Line 86: @@
 ENGLISH VERSION
-{{youtube>hFL-VEVd6NA}}
+{{youtube>64F-EEcCtA4?medium}}
 ITALIAN VERSION
-{{youtube>hur-R-npP2k}}
+{{youtube>0lKwD-npiao}}
 ===== WiFi configuration and MQTT server connection =====
@@ Line 128: / Line 133: @@
+===== SmartPID - Brewfather integration =====
+[[https://web.brewfather.app]] is one of the best platform for recipe design and brewing experience on both desktop and mobile devices. With a modern design that is easy to use interface allow any hobrewer to design the recipe and manage the the full brewday and fermentation
+The integration with smartPID allow from the web abb and any browser mobile and desktop to interact with smartPID controller to mange either the brewday or the fermentation process
+{{:smarpid_brewfather_architecture.png?500|}}
+This short guide provide you basic info an reference material to perform the integration
+the features that Brewfather provides are:
+Smart Hombrewing Application
+  * Recipe upload for starting the brew directly!
+  * Remote monitor of process parameters (set point, current temperature, PID out, pump status, timers)
+  * Process events listing
+  * Remote actions (process start/stop pause/resume, set point change, power change, pump start/auto/stop)
+Smart Thermostat
+  * Start the fermentation profile directly from the batch based on your recipe!
+  * Remote monitor of process parameters (set point, current temperature, PID out, timers)
+  * Process events listing
+  * Remote actions (process start/stop pause/resume, set point change)
+**Firmware Pre-Requirements**
+In order to use the integration a specific firwmare level is needed on SmartPID
+Both classic DIN box controller (STC version) and the new CUBE version are fully compatible.
+  * Smart Homebrewing ⇒ version 1.3-010 +
+  * Smart Thermostat ⇒ version 0.5-014 +
+Download the FW from the [[sw_release|SmartPID wiki]] page on the web site and upgrade as usual
+**Integration Instruction Manual**
+download the instruction manual and follow the step by step procedure
+{{ ::smarpid_brewfather_integration_standard.pdf |}}
+further informations directly on the Brewfather web site
+[[https://docs.brewfather.app/integrations/smartpid|https://docs.brewfather.app/integrations/smartpid]]
+and in this video tutorial
+{{youtube>8JxA5rezFiw?medium}}
+===== 3D Printed brakets for SmartPID cube panel mount =====
+SmarPID cube has a nice and versatile form factor that can be mounted in several different options
+  *   Desktop
+  *   Panel mount with optional Stainless Steal brackets (to add to the checkout)
+  *   DIN rail with bottom support
+{{::smartpid_cube_panel_mount.jpg?400|}}
+{{::smartpid_cube_din_rail.jpg?400|}}
+beside this option you can also **3D print a simple and effective plastic brackets** that keep steady and stable the “cube” and you can fix on the front panel with 4 screws. With this option even if the cut-out in your box is not perfectly precise you have a clean and fully functional solution
+{{::smartpid_cube_3d_printed_brakets_1_.png?400|}}
+{{::smartpid_cube_3d_printed_brakets_3_.png?400|}}
+here the STL files for the 3D printing !
+{{ :staffe.zip |}}
+Enjoy