Differences

This shows you the differences between two versions of the page.

--- start [2017/04/16 21:39] – [Demo & Tutorials] arzaman
+++ start [2025/04/01 09:44] (current) – external edit 127.0.0.1
@@ Line 13: / Line 13: @@
 ===== SW relase =====
-In this section you can find last [[SW release|SW release]] to upgrade the controller
+In this section you can find last [[SW release|SW release]] to upgrade the controller either for bug fixing or new features
 ===== Manuals =====
@@ Line 25: / Line 25: @@
 In this section you can find a useful set of articles and links on how to configure and use SmartPID
+  - [[Demo&Tutorials|SW upgrade procedure]]
+  - [[Demo&Tutorials|Klarstein and other single vessel BIAB mash tun retrofit]]
+  - [[Demo&Tutorials|WiFi configuration and MQTT server connection]]
+  - [[demo_tutorials|SmartPID - Brewfather integration]]
-==== SW upgrade procedure ====
-The firmware upgrade can be performed very easily using the MSD mass storage device bootloader technology that allow you to “copy paste” the binary executable file in the smartPID
-controller connected via USB and mapped as a USB memory
-**To upgrade FW you DON’T need any driver or SW installation,** just simply follow below steps
-Programming an application via the bootloader
-  - power up the board while keeping the S/S button pressed: the OLED display will be lit with a solid white color
-  - onnect the board to a USB port, it will appear as a mass storage device and the OLED display will alternate between a black and a white screen
-  - remove the FLASH.BIN file present in the mass storage device
-  - copy the your executable .bin file of your application to the mass storage device
-  - safely remove the USB mass storage device from the PC
-  - power-cycle the board and reboot
 ===== Integration example =====
@@ Line 46: / Line 35: @@
 In this section few integration of the controller with real application is reported
+  - [[Integration example|Smart Thermostat application for fermentation control]]